amazonaws.com – personalize

Tools (68)

Extracted live via the executor SDK.

• xAmzTargetAmazonPersonalizeCreateBatchInferenceJob.createBatchInferenceJob

  Creates a batch inference job. The operation can handle up to 50 million records and the input file must be in JSON format. For more information, see Creating a batch inference job.

• xAmzTargetAmazonPersonalizeCreateBatchSegmentJob.createBatchSegmentJob

  Creates a batch segment job. The operation can handle up to 50 million records and the input file must be in JSON format. For more information, see Getting batch recommendations and user segments.

• xAmzTargetAmazonPersonalizeCreateCampaign.createCampaign

  Creates a campaign that deploys a solution version. When a client calls the GetRecommendations and GetPersonalizedRanking APIs, a campaign is specified in the request.

  Minimum Provisioned TPS and Auto-Scaling

  A transaction is a single GetRecommendations or GetPersonalizedRanking call. Transactions per second (TPS) is the throughput and unit of billing for Amazon Personalize. The minimum provisioned TPS (minProvisionedTPS) specifies the baseline throughput provisioned by Amazon Personalize, and thus, the minimum billing charge.

  If your TPS increases beyond minProvisionedTPS, Amazon Personalize auto-scales the provisioned capacity up and down, but never below minProvisionedTPS. There's a short time delay while the capacity is increased that might cause loss of transactions.

  The actual TPS used is calculated as the average requests/second within a 5-minute window. You pay for maximum of either the minimum provisioned TPS or the actual TPS. We recommend starting with a low minProvisionedTPS, track your usage using Amazon CloudWatch metrics, and then increase the minProvisionedTPS as necessary.

  Status

  A campaign can be in one of the following states:

  • CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED

  • DELETE PENDING > DELETE IN_PROGRESS

  To get the campaign status, call DescribeCampaign.

  Wait until the status of the campaign is ACTIVE before asking the campaign for recommendations.

  Related APIs

  • ListCampaigns

  • DescribeCampaign

  • UpdateCampaign

  • DeleteCampaign

• xAmzTargetAmazonPersonalizeCreateDataset.createDataset

  Creates an empty dataset and adds it to the specified dataset group. Use CreateDatasetImportJob to import your training data to a dataset.

  There are three types of datasets:

  • Interactions

  • Items

  • Users

  Each dataset type has an associated schema with required field types. Only the Interactions dataset is required in order to train a model (also referred to as creating a solution).

  A dataset can be in one of the following states:

  • CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED

  • DELETE PENDING > DELETE IN_PROGRESS

  To get the status of the dataset, call DescribeDataset.

  Related APIs

  • CreateDatasetGroup

  • ListDatasets

  • DescribeDataset

  • DeleteDataset

• xAmzTargetAmazonPersonalizeCreateDatasetExportJob.createDatasetExportJob

  Creates a job that exports data from your dataset to an Amazon S3 bucket. To allow Amazon Personalize to export the training data, you must specify an service-linked IAM role that gives Amazon Personalize PutObject permissions for your Amazon S3 bucket. For information, see Exporting a dataset in the Amazon Personalize developer guide.

  Status

  A dataset export job can be in one of the following states:

  • CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED

  To get the status of the export job, call DescribeDatasetExportJob, and specify the Amazon Resource Name (ARN) of the dataset export job. The dataset export is complete when the status shows as ACTIVE. If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the job failed.

• xAmzTargetAmazonPersonalizeCreateDatasetGroup.createDatasetGroup

  Creates an empty dataset group. A dataset group is a container for Amazon Personalize resources. A dataset group can contain at most three datasets, one for each type of dataset:

  • Interactions

  • Items

  • Users

  A dataset group can be a Domain dataset group, where you specify a domain and use pre-configured resources like recommenders, or a Custom dataset group, where you use custom resources, such as a solution with a solution version, that you deploy with a campaign. If you start with a Domain dataset group, you can still add custom resources such as solutions and solution versions trained with recipes for custom use cases and deployed with campaigns.

  A dataset group can be in one of the following states:

  • CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED

  • DELETE PENDING

  To get the status of the dataset group, call DescribeDatasetGroup. If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the creation failed.

  You must wait until the status of the dataset group is ACTIVE before adding a dataset to the group.

  You can specify an Key Management Service (KMS) key to encrypt the datasets in the group. If you specify a KMS key, you must also include an Identity and Access Management (IAM) role that has permission to access the key.

  APIs that require a dataset group ARN in the request

  • CreateDataset

  • CreateEventTracker

  • CreateSolution

  Related APIs

  • ListDatasetGroups

  • DescribeDatasetGroup

  • DeleteDatasetGroup

• xAmzTargetAmazonPersonalizeCreateDatasetImportJob.createDatasetImportJob

  Creates a job that imports training data from your data source (an Amazon S3 bucket) to an Amazon Personalize dataset. To allow Amazon Personalize to import the training data, you must specify an IAM service role that has permission to read from the data source, as Amazon Personalize makes a copy of your data and processes it internally. For information on granting access to your Amazon S3 bucket, see Giving Amazon Personalize Access to Amazon S3 Resources.

  By default, a dataset import job replaces any existing data in the dataset that you imported in bulk. To add new records without replacing existing data, specify INCREMENTAL for the import mode in the CreateDatasetImportJob operation.

  Status

  A dataset import job can be in one of the following states:

  • CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED

  To get the status of the import job, call DescribeDatasetImportJob, providing the Amazon Resource Name (ARN) of the dataset import job. The dataset import is complete when the status shows as ACTIVE. If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the job failed.

  Importing takes time. You must wait until the status shows as ACTIVE before training a model using the dataset.

  Related APIs

  • ListDatasetImportJobs

  • DescribeDatasetImportJob

• xAmzTargetAmazonPersonalizeCreateEventTracker.createEventTracker

  Creates an event tracker that you use when adding event data to a specified dataset group using the PutEvents API.

  Only one event tracker can be associated with a dataset group. You will get an error if you call CreateEventTracker using the same dataset group as an existing event tracker.

  When you create an event tracker, the response includes a tracking ID, which you pass as a parameter when you use the PutEvents operation. Amazon Personalize then appends the event data to the Interactions dataset of the dataset group you specify in your event tracker.

  The event tracker can be in one of the following states:

  • CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED

  • DELETE PENDING > DELETE IN_PROGRESS

  To get the status of the event tracker, call DescribeEventTracker.

  The event tracker must be in the ACTIVE state before using the tracking ID.

  Related APIs

  • ListEventTrackers

  • DescribeEventTracker

  • DeleteEventTracker

• xAmzTargetAmazonPersonalizeCreateFilter.createFilter

  Creates a recommendation filter. For more information, see Filtering recommendations and user segments.

• xAmzTargetAmazonPersonalizeCreateMetricAttribution.createMetricAttribution

  Creates a metric attribution. A metric attribution creates reports on the data that you import into Amazon Personalize. Depending on how you imported the data, you can view reports in Amazon CloudWatch or Amazon S3. For more information, see Measuring impact of recommendations.

• xAmzTargetAmazonPersonalizeCreateRecommender.createRecommender

  Creates a recommender with the recipe (a Domain dataset group use case) you specify. You create recommenders for a Domain dataset group and specify the recommender's Amazon Resource Name (ARN) when you make a GetRecommendations request.

  Minimum recommendation requests per second

  When you create a recommender, you can configure the recommender's minimum recommendation requests per second. The minimum recommendation requests per second (minRecommendationRequestsPerSecond) specifies the baseline recommendation request throughput provisioned by Amazon Personalize. The default minRecommendationRequestsPerSecond is 1. A recommendation request is a single GetRecommendations operation. Request throughput is measured in requests per second and Amazon Personalize uses your requests per second to derive your requests per hour and the price of your recommender usage.

  If your requests per second increases beyond minRecommendationRequestsPerSecond, Amazon Personalize auto-scales the provisioned capacity up and down, but never below minRecommendationRequestsPerSecond. There's a short time delay while the capacity is increased that might cause loss of requests.

  Your bill is the greater of either the minimum requests per hour (based on minRecommendationRequestsPerSecond) or the actual number of requests. The actual request throughput used is calculated as the average requests/second within a one-hour window. We recommend starting with the default minRecommendationRequestsPerSecond, track your usage using Amazon CloudWatch metrics, and then increase the minRecommendationRequestsPerSecond as necessary.

  Status

  A recommender can be in one of the following states:

  • CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED

  • STOP PENDING > STOP IN_PROGRESS > INACTIVE > START PENDING > START IN_PROGRESS > ACTIVE

  • DELETE PENDING > DELETE IN_PROGRESS

  To get the recommender status, call DescribeRecommender.

  Wait until the status of the recommender is ACTIVE before asking the recommender for recommendations.

  Related APIs

  • ListRecommenders

  • DescribeRecommender

  • UpdateRecommender

  • DeleteRecommender

• xAmzTargetAmazonPersonalizeCreateSchema.createSchema

  Creates an Amazon Personalize schema from the specified schema string. The schema you create must be in Avro JSON format.

  Amazon Personalize recognizes three schema variants. Each schema is associated with a dataset type and has a set of required field and keywords. If you are creating a schema for a dataset in a Domain dataset group, you provide the domain of the Domain dataset group. You specify a schema when you call CreateDataset.

  Related APIs

  • ListSchemas

  • DescribeSchema

  • DeleteSchema

• xAmzTargetAmazonPersonalizeCreateSolution.createSolution

  Creates the configuration for training a model. A trained model is known as a solution. After the configuration is created, you train the model (create a solution) by calling the CreateSolutionVersion operation. Every time you call CreateSolutionVersion, a new version of the solution is created.

  After creating a solution version, you check its accuracy by calling GetSolutionMetrics. When you are satisfied with the version, you deploy it using CreateCampaign. The campaign provides recommendations to a client through the GetRecommendations API.

  To train a model, Amazon Personalize requires training data and a recipe. The training data comes from the dataset group that you provide in the request. A recipe specifies the training algorithm and a feature transformation. You can specify one of the predefined recipes provided by Amazon Personalize. Alternatively, you can specify performAutoML and Amazon Personalize will analyze your data and select the optimum USER_PERSONALIZATION recipe for you.

  Amazon Personalize doesn't support configuring the hpoObjective for solution hyperparameter optimization at this time.

  Status

  A solution can be in one of the following states:

  • CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED

  • DELETE PENDING > DELETE IN_PROGRESS

  To get the status of the solution, call DescribeSolution. Wait until the status shows as ACTIVE before calling CreateSolutionVersion.

  Related APIs

  • ListSolutions

  • CreateSolutionVersion

  • DescribeSolution

  • DeleteSolution

  • ListSolutionVersions

  • DescribeSolutionVersion

• xAmzTargetAmazonPersonalizeCreateSolutionVersion.createSolutionVersion

  Trains or retrains an active solution in a Custom dataset group. A solution is created using the CreateSolution operation and must be in the ACTIVE state before calling CreateSolutionVersion. A new version of the solution is created every time you call this operation.

  Status

  A solution version can be in one of the following states:

  • CREATE PENDING

  • CREATE IN_PROGRESS

  • ACTIVE

  • CREATE FAILED

  • CREATE STOPPING

  • CREATE STOPPED

  To get the status of the version, call DescribeSolutionVersion. Wait until the status shows as ACTIVE before calling CreateCampaign.

  If the status shows as CREATE FAILED, the response includes a failureReason key, which describes why the job failed.

  Related APIs

  • ListSolutionVersions

  • DescribeSolutionVersion

  • ListSolutions

  • CreateSolution

  • DescribeSolution

  • DeleteSolution

• xAmzTargetAmazonPersonalizeDeleteCampaign.deleteCampaign

  Removes a campaign by deleting the solution deployment. The solution that the campaign is based on is not deleted and can be redeployed when needed. A deleted campaign can no longer be specified in a GetRecommendations request. For information on creating campaigns, see CreateCampaign.

• xAmzTargetAmazonPersonalizeDeleteDataset.deleteDataset

  Deletes a dataset. You can't delete a dataset if an associated DatasetImportJob or SolutionVersion is in the CREATE PENDING or IN PROGRESS state. For more information on datasets, see CreateDataset.

• xAmzTargetAmazonPersonalizeDeleteDatasetGroup.deleteDatasetGroup

  Deletes a dataset group. Before you delete a dataset group, you must delete the following:

  • All associated event trackers.

  • All associated solutions.

  • All datasets in the dataset group.

• xAmzTargetAmazonPersonalizeDeleteEventTracker.deleteEventTracker

  Deletes the event tracker. Does not delete the event-interactions dataset from the associated dataset group. For more information on event trackers, see CreateEventTracker.

• xAmzTargetAmazonPersonalizeDeleteFilter.deleteFilter

  Deletes a filter.

• xAmzTargetAmazonPersonalizeDeleteMetricAttribution.deleteMetricAttribution

  Deletes a metric attribution.

• xAmzTargetAmazonPersonalizeDeleteRecommender.deleteRecommender

  Deactivates and removes a recommender. A deleted recommender can no longer be specified in a GetRecommendations request.

• xAmzTargetAmazonPersonalizeDeleteSchema.deleteSchema

  Deletes a schema. Before deleting a schema, you must delete all datasets referencing the schema. For more information on schemas, see CreateSchema.

• xAmzTargetAmazonPersonalizeDeleteSolution.deleteSolution

  Deletes all versions of a solution and the Solution object itself. Before deleting a solution, you must delete all campaigns based on the solution. To determine what campaigns are using the solution, call ListCampaigns and supply the Amazon Resource Name (ARN) of the solution. You can't delete a solution if an associated SolutionVersion is in the CREATE PENDING or IN PROGRESS state. For more information on solutions, see CreateSolution.

• xAmzTargetAmazonPersonalizeDescribeAlgorithm.describeAlgorithm

  Describes the given algorithm.

• xAmzTargetAmazonPersonalizeDescribeBatchInferenceJob.describeBatchInferenceJob

  Gets the properties of a batch inference job including name, Amazon Resource Name (ARN), status, input and output configurations, and the ARN of the solution version used to generate the recommendations.

• xAmzTargetAmazonPersonalizeDescribeBatchSegmentJob.describeBatchSegmentJob

  Gets the properties of a batch segment job including name, Amazon Resource Name (ARN), status, input and output configurations, and the ARN of the solution version used to generate segments.

• xAmzTargetAmazonPersonalizeDescribeCampaign.describeCampaign

  Describes the given campaign, including its status.

  A campaign can be in one of the following states:

  • CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED

  • DELETE PENDING > DELETE IN_PROGRESS

  When the status is CREATE FAILED, the response includes the failureReason key, which describes why.

  For more information on campaigns, see CreateCampaign.

• xAmzTargetAmazonPersonalizeDescribeDataset.describeDataset

  Describes the given dataset. For more information on datasets, see CreateDataset.

• xAmzTargetAmazonPersonalizeDescribeDatasetExportJob.describeDatasetExportJob

  Describes the dataset export job created by CreateDatasetExportJob, including the export job status.

• xAmzTargetAmazonPersonalizeDescribeDatasetGroup.describeDatasetGroup

  Describes the given dataset group. For more information on dataset groups, see CreateDatasetGroup.

• xAmzTargetAmazonPersonalizeDescribeDatasetImportJob.describeDatasetImportJob

  Describes the dataset import job created by CreateDatasetImportJob, including the import job status.

• xAmzTargetAmazonPersonalizeDescribeEventTracker.describeEventTracker

  Describes an event tracker. The response includes the trackingId and status of the event tracker. For more information on event trackers, see CreateEventTracker.

• xAmzTargetAmazonPersonalizeDescribeFeatureTransformation.describeFeatureTransformation

  Describes the given feature transformation.

• xAmzTargetAmazonPersonalizeDescribeFilter.describeFilter

  Describes a filter's properties.

• xAmzTargetAmazonPersonalizeDescribeMetricAttribution.describeMetricAttribution

  Describes a metric attribution.

• xAmzTargetAmazonPersonalizeDescribeRecipe.describeRecipe

  Describes a recipe.

  A recipe contains three items:

  • An algorithm that trains a model.

  • Hyperparameters that govern the training.

  • Feature transformation information for modifying the input data before training.

  Amazon Personalize provides a set of predefined recipes. You specify a recipe when you create a solution with the CreateSolution API. CreateSolution trains a model by using the algorithm in the specified recipe and a training dataset. The solution, when deployed as a campaign, can provide recommendations using the GetRecommendations API.

• xAmzTargetAmazonPersonalizeDescribeRecommender.describeRecommender

  Describes the given recommender, including its status.

  A recommender can be in one of the following states:

  • CREATE PENDING > CREATE IN_PROGRESS > ACTIVE -or- CREATE FAILED

  • STOP PENDING > STOP IN_PROGRESS > INACTIVE > START PENDING > START IN_PROGRESS > ACTIVE

  • DELETE PENDING > DELETE IN_PROGRESS

  When the status is CREATE FAILED, the response includes the failureReason key, which describes why.

  The modelMetrics key is null when the recommender is being created or deleted.

  For more information on recommenders, see CreateRecommender.

• xAmzTargetAmazonPersonalizeDescribeSchema.describeSchema

  Describes a schema. For more information on schemas, see CreateSchema.

• xAmzTargetAmazonPersonalizeDescribeSolution.describeSolution

  Describes a solution. For more information on solutions, see CreateSolution.

• xAmzTargetAmazonPersonalizeDescribeSolutionVersion.describeSolutionVersion

  Describes a specific version of a solution. For more information on solutions, see CreateSolution

• xAmzTargetAmazonPersonalizeGetSolutionMetrics.getSolutionMetrics

  Gets the metrics for the specified solution version.

• xAmzTargetAmazonPersonalizeListBatchInferenceJobs.listBatchInferenceJobs

  Gets a list of the batch inference jobs that have been performed off of a solution version.

• xAmzTargetAmazonPersonalizeListBatchSegmentJobs.listBatchSegmentJobs

  Gets a list of the batch segment jobs that have been performed off of a solution version that you specify.

• xAmzTargetAmazonPersonalizeListCampaigns.listCampaigns

  Returns a list of campaigns that use the given solution. When a solution is not specified, all the campaigns associated with the account are listed. The response provides the properties for each campaign, including the Amazon Resource Name (ARN). For more information on campaigns, see CreateCampaign.

• xAmzTargetAmazonPersonalizeListDatasetExportJobs.listDatasetExportJobs

  Returns a list of dataset export jobs that use the given dataset. When a dataset is not specified, all the dataset export jobs associated with the account are listed. The response provides the properties for each dataset export job, including the Amazon Resource Name (ARN). For more information on dataset export jobs, see CreateDatasetExportJob. For more information on datasets, see CreateDataset.

• xAmzTargetAmazonPersonalizeListDatasetGroups.listDatasetGroups

  Returns a list of dataset groups. The response provides the properties for each dataset group, including the Amazon Resource Name (ARN). For more information on dataset groups, see CreateDatasetGroup.

• xAmzTargetAmazonPersonalizeListDatasetImportJobs.listDatasetImportJobs

  Returns a list of dataset import jobs that use the given dataset. When a dataset is not specified, all the dataset import jobs associated with the account are listed. The response provides the properties for each dataset import job, including the Amazon Resource Name (ARN). For more information on dataset import jobs, see CreateDatasetImportJob. For more information on datasets, see CreateDataset.

• xAmzTargetAmazonPersonalizeListDatasets.listDatasets

  Returns the list of datasets contained in the given dataset group. The response provides the properties for each dataset, including the Amazon Resource Name (ARN). For more information on datasets, see CreateDataset.

• xAmzTargetAmazonPersonalizeListEventTrackers.listEventTrackers

  Returns the list of event trackers associated with the account. The response provides the properties for each event tracker, including the Amazon Resource Name (ARN) and tracking ID. For more information on event trackers, see CreateEventTracker.

• xAmzTargetAmazonPersonalizeListFilters.listFilters

  Lists all filters that belong to a given dataset group.

• xAmzTargetAmazonPersonalizeListMetricAttributionMetrics.listMetricAttributionMetrics

  Lists the metrics for the metric attribution.

• xAmzTargetAmazonPersonalizeListMetricAttributions.listMetricAttributions

  Lists metric attributions.

• xAmzTargetAmazonPersonalizeListRecipes.listRecipes

  Returns a list of available recipes. The response provides the properties for each recipe, including the recipe's Amazon Resource Name (ARN).

• xAmzTargetAmazonPersonalizeListRecommenders.listRecommenders

  Returns a list of recommenders in a given Domain dataset group. When a Domain dataset group is not specified, all the recommenders associated with the account are listed. The response provides the properties for each recommender, including the Amazon Resource Name (ARN). For more information on recommenders, see CreateRecommender.

• xAmzTargetAmazonPersonalizeListSchemas.listSchemas

  Returns the list of schemas associated with the account. The response provides the properties for each schema, including the Amazon Resource Name (ARN). For more information on schemas, see CreateSchema.

• xAmzTargetAmazonPersonalizeListSolutions.listSolutions

  Returns a list of solutions that use the given dataset group. When a dataset group is not specified, all the solutions associated with the account are listed. The response provides the properties for each solution, including the Amazon Resource Name (ARN). For more information on solutions, see CreateSolution.

• xAmzTargetAmazonPersonalizeListSolutionVersions.listSolutionVersions

  Returns a list of solution versions for the given solution. When a solution is not specified, all the solution versions associated with the account are listed. The response provides the properties for each solution version, including the Amazon Resource Name (ARN).

• xAmzTargetAmazonPersonalizeListTagsForResource.listTagsForResource

  Get a list of tags attached to a resource.

• xAmzTargetAmazonPersonalizeStartRecommender.startRecommender

  Starts a recommender that is INACTIVE. Starting a recommender does not create any new models, but resumes billing and automatic retraining for the recommender.

• xAmzTargetAmazonPersonalizeStopRecommender.stopRecommender

  Stops a recommender that is ACTIVE. Stopping a recommender halts billing and automatic retraining for the recommender.

• xAmzTargetAmazonPersonalizeStopSolutionVersionCreation.stopSolutionVersionCreation

  Stops creating a solution version that is in a state of CREATE_PENDING or CREATE IN_PROGRESS.

  Depending on the current state of the solution version, the solution version state changes as follows:

  • CREATE_PENDING > CREATE_STOPPED

    or

  • CREATE_IN_PROGRESS > CREATE_STOPPING > CREATE_STOPPED

  You are billed for all of the training completed up until you stop the solution version creation. You cannot resume creating a solution version once it has been stopped.

• xAmzTargetAmazonPersonalizeTagResource.tagResource

  Add a list of tags to a resource.

• xAmzTargetAmazonPersonalizeUntagResource.untagResource

  Remove tags that are attached to a resource.

• xAmzTargetAmazonPersonalizeUpdateCampaign.updateCampaign

  Updates a campaign by either deploying a new solution or changing the value of the campaign's minProvisionedTPS parameter.

  To update a campaign, the campaign status must be ACTIVE or CREATE FAILED. Check the campaign status using the DescribeCampaign operation.

  You can still get recommendations from a campaign while an update is in progress. The campaign will use the previous solution version and campaign configuration to generate recommendations until the latest campaign update status is Active.

  For more information on campaigns, see CreateCampaign.

• xAmzTargetAmazonPersonalizeUpdateMetricAttribution.updateMetricAttribution

  Updates a metric attribution.

• xAmzTargetAmazonPersonalizeUpdateRecommender.updateRecommender

  Updates the recommender to modify the recommender configuration.

• openapi.previewSpec

  Preview an OpenAPI document before adding it as a source

• openapi.addSource

  Add an OpenAPI source and register its operations as tools