integrations.sh
← all integrations

amazonaws.com – elasticloadbalancingv2

OpenAPI apis-guru cloud

Elastic Load Balancing

A load balancer distributes incoming traffic across targets, such as your EC2 instances. This enables you to increase the availability of your application. The load balancer also monitors the health of its registered targets and ensures that it routes traffic only to healthy targets. You configure your load balancer to accept incoming traffic by specifying one or more listeners, which are configured with a protocol and port number for connections from clients to the load balancer. You configure a target group with a protocol and port number for connections from the load balancer to the targets, and with health check settings to be used when checking the health status of the targets.

Elastic Load Balancing supports the following types of load balancers: Application Load Balancers, Network Load Balancers, Gateway Load Balancers, and Classic Load Balancers. This reference covers the following load balancer types:

  • Application Load Balancer - Operates at the application layer (layer 7) and supports HTTP and HTTPS.

  • Network Load Balancer - Operates at the transport layer (layer 4) and supports TCP, TLS, and UDP.

  • Gateway Load Balancer - Operates at the network layer (layer 3).

For more information, see the .

All Elastic Load Balancing operations are idempotent, which means that they complete at most one time. If you repeat an operation, it succeeds.

Homepage
https://api.apis.guru/v2/specs/amazonaws.com:elasticloadbalancingv2/2015-12-01.json
Provider
amazonaws.com:elasticloadbalancingv2 / elasticloadbalancingv2
OpenAPI version
3.0.0
Spec (JSON)
https://api.apis.guru/v2/specs/amazonaws.com/elasticloadbalancingv2/2015-12-01/openapi.json
Spec (YAML)
https://api.apis.guru/v2/specs/amazonaws.com/elasticloadbalancingv2/2015-12-01/openapi.yaml

Tools (70)

Extracted live via the executor SDK.

  • actionAddListenerCertificates.getAddListenerCertificates

    Adds the specified SSL server certificate to the certificate list for the specified HTTPS or TLS listener.

    If the certificate in already in the certificate list, the call is successful but the certificate is not added again.

    For more information, see in the Application Load Balancers Guide or in the Network Load Balancers Guide.

  • actionAddListenerCertificates.postAddListenerCertificates

    Adds the specified SSL server certificate to the certificate list for the specified HTTPS or TLS listener.

    If the certificate in already in the certificate list, the call is successful but the certificate is not added again.

    For more information, see in the Application Load Balancers Guide or in the Network Load Balancers Guide.

  • actionAddTags.getAddTags

    Adds the specified tags to the specified Elastic Load Balancing resource. You can tag your Application Load Balancers, Network Load Balancers, Gateway Load Balancers, target groups, listeners, and rules.

    Each tag consists of a key and an optional value. If a resource already has a tag with the same key, AddTags updates its value.

  • actionAddTags.postAddTags

    Adds the specified tags to the specified Elastic Load Balancing resource. You can tag your Application Load Balancers, Network Load Balancers, Gateway Load Balancers, target groups, listeners, and rules.

    Each tag consists of a key and an optional value. If a resource already has a tag with the same key, AddTags updates its value.

  • actionCreateListener.getCreateListener

    Creates a listener for the specified Application Load Balancer, Network Load Balancer, or Gateway Load Balancer.

    For more information, see the following:

    This operation is idempotent, which means that it completes at most one time. If you attempt to create multiple listeners with the same settings, each call succeeds.

  • actionCreateListener.postCreateListener

    Creates a listener for the specified Application Load Balancer, Network Load Balancer, or Gateway Load Balancer.

    For more information, see the following:

    This operation is idempotent, which means that it completes at most one time. If you attempt to create multiple listeners with the same settings, each call succeeds.

  • actionCreateLoadBalancer.getCreateLoadBalancer

    Creates an Application Load Balancer, Network Load Balancer, or Gateway Load Balancer.

    For more information, see the following:

    This operation is idempotent, which means that it completes at most one time. If you attempt to create multiple load balancers with the same settings, each call succeeds.

  • actionCreateLoadBalancer.postCreateLoadBalancer

    Creates an Application Load Balancer, Network Load Balancer, or Gateway Load Balancer.

    For more information, see the following:

    This operation is idempotent, which means that it completes at most one time. If you attempt to create multiple load balancers with the same settings, each call succeeds.

  • actionCreateRule.getCreateRule

    Creates a rule for the specified listener. The listener must be associated with an Application Load Balancer.

    Each rule consists of a priority, one or more actions, and one or more conditions. Rules are evaluated in priority order, from the lowest value to the highest value. When the conditions for a rule are met, its actions are performed. If the conditions for no rules are met, the actions for the default rule are performed. For more information, see in the Application Load Balancers Guide.

  • actionCreateRule.postCreateRule

    Creates a rule for the specified listener. The listener must be associated with an Application Load Balancer.

    Each rule consists of a priority, one or more actions, and one or more conditions. Rules are evaluated in priority order, from the lowest value to the highest value. When the conditions for a rule are met, its actions are performed. If the conditions for no rules are met, the actions for the default rule are performed. For more information, see in the Application Load Balancers Guide.

  • actionCreateTargetGroup.getCreateTargetGroup

    Creates a target group.

    For more information, see the following:

    This operation is idempotent, which means that it completes at most one time. If you attempt to create multiple target groups with the same settings, each call succeeds.

  • actionCreateTargetGroup.postCreateTargetGroup

    Creates a target group.

    For more information, see the following:

    This operation is idempotent, which means that it completes at most one time. If you attempt to create multiple target groups with the same settings, each call succeeds.

  • actionDeleteListener.getDeleteListener

    Deletes the specified listener.

    Alternatively, your listener is deleted when you delete the load balancer to which it is attached.

  • actionDeleteListener.postDeleteListener

    Deletes the specified listener.

    Alternatively, your listener is deleted when you delete the load balancer to which it is attached.

  • actionDeleteLoadBalancer.getDeleteLoadBalancer

    Deletes the specified Application Load Balancer, Network Load Balancer, or Gateway Load Balancer. Deleting a load balancer also deletes its listeners.

    You can't delete a load balancer if deletion protection is enabled. If the load balancer does not exist or has already been deleted, the call succeeds.

    Deleting a load balancer does not affect its registered targets. For example, your EC2 instances continue to run and are still registered to their target groups. If you no longer need these EC2 instances, you can stop or terminate them.

  • actionDeleteLoadBalancer.postDeleteLoadBalancer

    Deletes the specified Application Load Balancer, Network Load Balancer, or Gateway Load Balancer. Deleting a load balancer also deletes its listeners.

    You can't delete a load balancer if deletion protection is enabled. If the load balancer does not exist or has already been deleted, the call succeeds.

    Deleting a load balancer does not affect its registered targets. For example, your EC2 instances continue to run and are still registered to their target groups. If you no longer need these EC2 instances, you can stop or terminate them.

  • actionDeleteRule.getDeleteRule

    Deletes the specified rule.

    You can't delete the default rule.

  • actionDeleteRule.postDeleteRule

    Deletes the specified rule.

    You can't delete the default rule.

  • actionDeleteTargetGroup.getDeleteTargetGroup

    Deletes the specified target group.

    You can delete a target group if it is not referenced by any actions. Deleting a target group also deletes any associated health checks. Deleting a target group does not affect its registered targets. For example, any EC2 instances continue to run until you stop or terminate them.

  • actionDeleteTargetGroup.postDeleteTargetGroup

    Deletes the specified target group.

    You can delete a target group if it is not referenced by any actions. Deleting a target group also deletes any associated health checks. Deleting a target group does not affect its registered targets. For example, any EC2 instances continue to run until you stop or terminate them.

  • actionDeregisterTargets.getDeregisterTargets

    Deregisters the specified targets from the specified target group. After the targets are deregistered, they no longer receive traffic from the load balancer.

  • actionDeregisterTargets.postDeregisterTargets

    Deregisters the specified targets from the specified target group. After the targets are deregistered, they no longer receive traffic from the load balancer.

  • actionDescribeAccountLimits.getDescribeAccountLimits

    Describes the current Elastic Load Balancing resource limits for your Amazon Web Services account.

    For more information, see the following:

  • actionDescribeAccountLimits.postDescribeAccountLimits

    Describes the current Elastic Load Balancing resource limits for your Amazon Web Services account.

    For more information, see the following:

  • actionDescribeListenerCertificates.getDescribeListenerCertificates

    Describes the default certificate and the certificate list for the specified HTTPS or TLS listener.

    If the default certificate is also in the certificate list, it appears twice in the results (once with IsDefault set to true and once with IsDefault set to false).

    For more information, see in the Application Load Balancers Guide or in the Network Load Balancers Guide.

  • actionDescribeListenerCertificates.postDescribeListenerCertificates

    Describes the default certificate and the certificate list for the specified HTTPS or TLS listener.

    If the default certificate is also in the certificate list, it appears twice in the results (once with IsDefault set to true and once with IsDefault set to false).

    For more information, see in the Application Load Balancers Guide or in the Network Load Balancers Guide.

  • actionDescribeListeners.getDescribeListeners

    Describes the specified listeners or the listeners for the specified Application Load Balancer, Network Load Balancer, or Gateway Load Balancer. You must specify either a load balancer or one or more listeners.

  • actionDescribeListeners.postDescribeListeners

    Describes the specified listeners or the listeners for the specified Application Load Balancer, Network Load Balancer, or Gateway Load Balancer. You must specify either a load balancer or one or more listeners.

  • actionDescribeLoadBalancerAttributes.getDescribeLoadBalancerAttributes

    Describes the attributes for the specified Application Load Balancer, Network Load Balancer, or Gateway Load Balancer.

    For more information, see the following:

    • in the Application Load Balancers Guide

    • in the Network Load Balancers Guide

    • in the Gateway Load Balancers Guide

  • actionDescribeLoadBalancerAttributes.postDescribeLoadBalancerAttributes

    Describes the attributes for the specified Application Load Balancer, Network Load Balancer, or Gateway Load Balancer.

    For more information, see the following:

    • in the Application Load Balancers Guide

    • in the Network Load Balancers Guide

    • in the Gateway Load Balancers Guide

  • actionDescribeLoadBalancers.getDescribeLoadBalancers

    Describes the specified load balancers or all of your load balancers.

  • actionDescribeLoadBalancers.postDescribeLoadBalancers

    Describes the specified load balancers or all of your load balancers.

  • actionDescribeRules.getDescribeRules

    Describes the specified rules or the rules for the specified listener. You must specify either a listener or one or more rules.

  • actionDescribeRules.postDescribeRules

    Describes the specified rules or the rules for the specified listener. You must specify either a listener or one or more rules.

  • actionDescribeSslPolicies.getDescribeSslPolicies

    Describes the specified policies or all policies used for SSL negotiation.

    For more information, see in the Application Load Balancers Guide or in the Network Load Balancers Guide.

  • actionDescribeSslPolicies.postDescribeSslPolicies

    Describes the specified policies or all policies used for SSL negotiation.

    For more information, see in the Application Load Balancers Guide or in the Network Load Balancers Guide.

  • actionDescribeTags.getDescribeTags

    Describes the tags for the specified Elastic Load Balancing resources. You can describe the tags for one or more Application Load Balancers, Network Load Balancers, Gateway Load Balancers, target groups, listeners, or rules.

  • actionDescribeTags.postDescribeTags

    Describes the tags for the specified Elastic Load Balancing resources. You can describe the tags for one or more Application Load Balancers, Network Load Balancers, Gateway Load Balancers, target groups, listeners, or rules.

  • actionDescribeTargetGroupAttributes.getDescribeTargetGroupAttributes

    Describes the attributes for the specified target group.

    For more information, see the following:

    • in the Application Load Balancers Guide

    • in the Network Load Balancers Guide

    • in the Gateway Load Balancers Guide

  • actionDescribeTargetGroupAttributes.postDescribeTargetGroupAttributes

    Describes the attributes for the specified target group.

    For more information, see the following:

    • in the Application Load Balancers Guide

    • in the Network Load Balancers Guide

    • in the Gateway Load Balancers Guide

  • actionDescribeTargetGroups.getDescribeTargetGroups

    Describes the specified target groups or all of your target groups. By default, all target groups are described. Alternatively, you can specify one of the following to filter the results: the ARN of the load balancer, the names of one or more target groups, or the ARNs of one or more target groups.

  • actionDescribeTargetGroups.postDescribeTargetGroups

    Describes the specified target groups or all of your target groups. By default, all target groups are described. Alternatively, you can specify one of the following to filter the results: the ARN of the load balancer, the names of one or more target groups, or the ARNs of one or more target groups.

  • actionDescribeTargetHealth.getDescribeTargetHealth

    Describes the health of the specified targets or all of your targets.

  • actionDescribeTargetHealth.postDescribeTargetHealth

    Describes the health of the specified targets or all of your targets.

  • actionModifyListener.getModifyListener

    Replaces the specified properties of the specified listener. Any properties that you do not specify remain unchanged.

    Changing the protocol from HTTPS to HTTP, or from TLS to TCP, removes the security policy and default certificate properties. If you change the protocol from HTTP to HTTPS, or from TCP to TLS, you must add the security policy and default certificate properties.

    To add an item to a list, remove an item from a list, or update an item in a list, you must provide the entire list. For example, to add an action, specify a list with the current actions plus the new action.

  • actionModifyListener.postModifyListener

    Replaces the specified properties of the specified listener. Any properties that you do not specify remain unchanged.

    Changing the protocol from HTTPS to HTTP, or from TLS to TCP, removes the security policy and default certificate properties. If you change the protocol from HTTP to HTTPS, or from TCP to TLS, you must add the security policy and default certificate properties.

    To add an item to a list, remove an item from a list, or update an item in a list, you must provide the entire list. For example, to add an action, specify a list with the current actions plus the new action.

  • actionModifyLoadBalancerAttributes.getModifyLoadBalancerAttributes

    Modifies the specified attributes of the specified Application Load Balancer, Network Load Balancer, or Gateway Load Balancer.

    If any of the specified attributes can't be modified as requested, the call fails. Any existing attributes that you do not modify retain their current values.

  • actionModifyLoadBalancerAttributes.postModifyLoadBalancerAttributes

    Modifies the specified attributes of the specified Application Load Balancer, Network Load Balancer, or Gateway Load Balancer.

    If any of the specified attributes can't be modified as requested, the call fails. Any existing attributes that you do not modify retain their current values.

  • actionModifyRule.getModifyRule

    Replaces the specified properties of the specified rule. Any properties that you do not specify are unchanged.

    To add an item to a list, remove an item from a list, or update an item in a list, you must provide the entire list. For example, to add an action, specify a list with the current actions plus the new action.

  • actionModifyRule.postModifyRule

    Replaces the specified properties of the specified rule. Any properties that you do not specify are unchanged.

    To add an item to a list, remove an item from a list, or update an item in a list, you must provide the entire list. For example, to add an action, specify a list with the current actions plus the new action.

  • actionModifyTargetGroup.getModifyTargetGroup

    Modifies the health checks used when evaluating the health state of the targets in the specified target group.

  • actionModifyTargetGroup.postModifyTargetGroup

    Modifies the health checks used when evaluating the health state of the targets in the specified target group.

  • actionModifyTargetGroupAttributes.getModifyTargetGroupAttributes

    Modifies the specified attributes of the specified target group.

  • actionModifyTargetGroupAttributes.postModifyTargetGroupAttributes

    Modifies the specified attributes of the specified target group.

  • actionRegisterTargets.getRegisterTargets

    Registers the specified targets with the specified target group.

    If the target is an EC2 instance, it must be in the running state when you register it.

    By default, the load balancer routes requests to registered targets using the protocol and port for the target group. Alternatively, you can override the port for a target when you register it. You can register each EC2 instance or IP address with the same target group multiple times using different ports.

    With a Network Load Balancer, you cannot register instances by instance ID if they have the following instance types: C1, CC1, CC2, CG1, CG2, CR1, CS1, G1, G2, HI1, HS1, M1, M2, M3, and T1. You can register instances of these types by IP address.

  • actionRegisterTargets.postRegisterTargets

    Registers the specified targets with the specified target group.

    If the target is an EC2 instance, it must be in the running state when you register it.

    By default, the load balancer routes requests to registered targets using the protocol and port for the target group. Alternatively, you can override the port for a target when you register it. You can register each EC2 instance or IP address with the same target group multiple times using different ports.

    With a Network Load Balancer, you cannot register instances by instance ID if they have the following instance types: C1, CC1, CC2, CG1, CG2, CR1, CS1, G1, G2, HI1, HS1, M1, M2, M3, and T1. You can register instances of these types by IP address.

  • actionRemoveListenerCertificates.getRemoveListenerCertificates

    Removes the specified certificate from the certificate list for the specified HTTPS or TLS listener.

  • actionRemoveListenerCertificates.postRemoveListenerCertificates

    Removes the specified certificate from the certificate list for the specified HTTPS or TLS listener.

  • actionRemoveTags.getRemoveTags

    Removes the specified tags from the specified Elastic Load Balancing resources. You can remove the tags for one or more Application Load Balancers, Network Load Balancers, Gateway Load Balancers, target groups, listeners, or rules.

  • actionRemoveTags.postRemoveTags

    Removes the specified tags from the specified Elastic Load Balancing resources. You can remove the tags for one or more Application Load Balancers, Network Load Balancers, Gateway Load Balancers, target groups, listeners, or rules.

  • actionSetIpAddressType.getSetIpAddressType

    Sets the type of IP addresses used by the subnets of the specified load balancer.

  • actionSetIpAddressType.postSetIpAddressType

    Sets the type of IP addresses used by the subnets of the specified load balancer.

  • actionSetRulePriorities.getSetRulePriorities

    Sets the priorities of the specified rules.

    You can reorder the rules as long as there are no priority conflicts in the new order. Any existing rules that you do not specify retain their current priority.

  • actionSetRulePriorities.postSetRulePriorities

    Sets the priorities of the specified rules.

    You can reorder the rules as long as there are no priority conflicts in the new order. Any existing rules that you do not specify retain their current priority.

  • actionSetSecurityGroups.getSetSecurityGroups

    Associates the specified security groups with the specified Application Load Balancer. The specified security groups override the previously associated security groups.

    You can't specify a security group for a Network Load Balancer or Gateway Load Balancer.

  • actionSetSecurityGroups.postSetSecurityGroups

    Associates the specified security groups with the specified Application Load Balancer. The specified security groups override the previously associated security groups.

    You can't specify a security group for a Network Load Balancer or Gateway Load Balancer.

  • actionSetSubnets.getSetSubnets

    Enables the Availability Zones for the specified public subnets for the specified Application Load Balancer or Network Load Balancer. The specified subnets replace the previously enabled subnets.

    When you specify subnets for a Network Load Balancer, you must include all subnets that were enabled previously, with their existing configurations, plus any additional subnets.

  • actionSetSubnets.postSetSubnets

    Enables the Availability Zones for the specified public subnets for the specified Application Load Balancer or Network Load Balancer. The specified subnets replace the previously enabled subnets.

    When you specify subnets for a Network Load Balancer, you must include all subnets that were enabled previously, with their existing configurations, plus any additional subnets.

  • openapi.previewSpec

    Preview an OpenAPI document before adding it as a source

  • openapi.addSource

    Add an OpenAPI source and register its operations as tools